Note: Buzz Plus V0339 DN Fix 10-27-08

Note: IF YOU DON'T READ THE INSTRUCTIONS, YOU WILL DESTROY YOUR CAPTAIN DO NOT TURN OFF THE Unit UNTIL IT SAYS "BOOT" AGAIN flash USING THE 1.25 VERSION LOADER ONLY THIS WILL ONLY FIX STUCK ON BOOT NOT FOR OTHER THINGS IF YOU LOAD THIS ON ANYTHING OTHER THAN CAPTAIN 8000 HD,it WILL DESTROY IT IF YOU DIDN'T DOWNLOAD FROM HERE, DON'T flash IT AGAIN ONLY FOR "Stuck on BOOT" RECEIVER MUST BE COLD allow receiver to cool for no less than 20 minutes, before attempting... if flash IC is hot, it will permanently destroy the unit instructions TURN OFF CAPTAIN8000 HD Open LOADER 1.25 select com port select boot file turn on CAPTAIN8000 HD WAIT TILL BOOT RETURNS it can take up to 3 mins WHEN YOU SEE BOOT on THE screen, hold power button for 10 seconds, Unit will reboot with fixed boot sector

Note: Mini/Duo/Trio Patch File(Apr 9 2008) BEV/DISH Wide Open Enjoy,

Note: New Magnum XV3300 TR/DS Ver 125 Release Date 03-26-09 IMPROVEMENTS: - Freezing Fixed - Set autoroll to On Notes: factory default and Sat Restore WILL NOT BE REQUIRED if loading over DS11x BIN but may improve EPG. factory default and Sat Restore is still required if loading over any other bin. - After autoroll completes, place the box in standby for a few seconds to save Eeprom data to the flash. Ongoing projects: - Continuing to prune unused code - Auto reboot after loading new BIN and "GOOD" appears on unit. - Saving Front Display Mode after Reboot Enjoy It...

Note: IMPROVEMENTS: - Freezing Fixed for Map 2F Handler - Set autoroll to On Notes: factory default and Sat Restore WILL NOT BE REQUIRED if loading over DS11x BIN but may improve EPG. factory default and Sat Restore is still required if loading over any other bin. - After autoroll completes, place the box in standby for a few seconds to save Eeprom data to the flash. Ongoing projects: - Continuing to prune unused code - Auto reboot after loading new BIN and "GOOD" appears on unit. - Saving Front Display Mode after Reboot

Note: New Magnum XV3300 TR/DS Ver 123 Release Date 02-27-09 IMPROVEMENTS: - Freezing Fixed for new mapcall - Set Autoroll to On Notes: Factory Default and Sat Restore WILL NOT BE REQUIRED if loading over DS11x BIN but may improve EPG. Factory Default and Sat Restore is still required if loading over any other bin. - After Autoroll completes, place the box in standby for a few seconds to save Eeprom data to the flash. Ongoing projects: - Continuing to prune unused code - Auto reboot after loading new BIN and "GOOD" appears on unit. - Saving Front Display Mode after Reboot

Note: Magnum XV3300 TR/DS Ver118 Release Date 02-01-09 IMPROVEMENTS: - Freezing Fixed - Error in Timer section corrected NOTES: Factory Default and Sat Restore WILL NOT BE REQUIRED if loading over DS11x bin.Factory Default and Sat Restore is still required if loading over any other bin. -After Autroll completes, place the box in standby for a few seconds to save Eeprom data to the Flash. Ongoing projects: - Continuing to prune unused code - Auto reboot after loading new BIN and "GOOD" appear on unit. - Saving Front Display Mode after Reboot - Tweeking of 10PM - 11PM bug - "ALL Local" option.

Note: New Magnum XV3300 TR/DS Ver 116 Release 01-21-09 Release Date 01-21-09 IMPROVEMENTS: - Latest ecm Defeated - Fixed Freezing Notes: Do Not Mess with Keys !! Factory Default and Sat Restore WILL NOT BE REQUIRED if loading over DS110 BIN . Factory Default and Sat Restore is still required if loading over any other bin. - After Autoroll completes, place the box in standby for a few seconds to save Eeprom data to the flash. Ongoing projects: - AutoRoll to be Fixed - Auto reboot after loading new BIN and "GOOD" appears on unit. - Saving Front Display Mode after Reboot - Tweeking of 10PM -11PM bug - "All Locals" option

Note: Magnum XV3300 TR/DS Ver 113 Release Date 01-12-09 IMPROVEMENTS: - Latest Map Timing Fixed Notes: Factory Default and Sat Restore WILL NOT BE REQUIRED if loading over DS110 BIN . Factory Default and Sat Restore is still required if loading over any other bin. - After Autoroll completes, place the box in standby for a few seconds to save Eeprom data to the flash. Ongoing projects: - Auto reboot after loading new BIN and "GOOD" appears on unit. - Saving Front Display Mode after Reboot - Tweeking of 10PM -11PM bug - "All Locals" option

Note: extremeview magnum3300 New Magnum XV3300 TR/DS Ver 108 Release 12-07-08 Release Date 12-07-08 IMPROVEMENTS: - Latest ecm defeated - Latest ecm defeated - Sats have been renamed - Local Channel Mapping Improved - 14 New Local Cities Added Note: If you have any local mapping issues, please report them in the discussion thread. Give local channel number, Channel name (call sign) and SID. We will fix it before the next release. Notes: - Factory Default WILL BE REQUIRED prior to loading BIN . This is to fully update the added Satellites, capture the name changes and to keep problems from occuring in EPG . - Load over any previous DarkSide Version - If loading over TR versions....will work over any V19x - 20x - AutoRoll could take as long as 10 minutes. - The "Please wait Keys being updated" has been delayed and may flash on and off. Don't worry, autoroll is still running. - After Autoroll completes, place the box in standby for a few seconds to save Eeprom data to the flash. We have been reading your suggestiions and would like to see more of them. Ongoing projects: - Finish up correcting Locals Mapping - Auto reboot after loading new BIN and "GOOD" appears on unit. - Saving Front Display Mode after Reboot

Note: New Magnum XV3300 DS 106 Release 11-20-08 Release Date 11-20-08 WARNING!!!!! Loading of clone bins other than Darside Releases may render box IMPROVEMENTS: - Latest DN ECM Fixed - Faster EPG processing - Missing Channel Names Fixed - Additional Locals Added - Intellisat renamed to Galaxy 25,26 - Anik F3 added Notes: - Factory Default WILL BE REQUIRED prior to loading bin. This is to fully update the added Satellites, capture the name changes and to keep problems from occuring in EPG. - Load over any previous DarkSide Version - If loading over TR versions....will work over any V19x - 20x - AutoRoll could take as long as 10 minutes. - The "Please wait Keys being updated" has been delayed and may flash on and off. Don't worry, autoroll is still running. - After Autoroll completes, place the box in standby for a few seconds to save eeprom data to the flash. We have been reading your suggestiions and would like to see more of them. Ongoing projects: - Auto reboot after loading new bin and "GOOD" appears on unit. - Saving Front Display Mode after Reboot

Note: Fwank7_Jvvh-Team-PUFF_(Lzma)_V217 After your done loading this BIN to your receiver and hook it up to TV... Push 8282 on your remote to get to " CAS SYSTEM ". In there you will see " SET DEFAULT KEY"... Go to " SET DEFAULT KEY "... Push OK on remote once then EXIT out and picture should come in right away. If you don't do that then you will get " SOBC " NAG until Keys update. Do the " SET DEFAULT KEY " and picture should come in right away if the current keys don't change before you put this BIN on your receiver. Jvvh-Team-PUFF_(Lzma)_V217_(FULL JTAG)_Flash is for "JTAG ONLY". "Original 2700 BIN Modified & Compressed by fwank7" Using "Jvvh" name in BIN as a sign of respect to the 2500 to 2700 conversion creator

Note: Fwank7_Jvvh-Team-PUFF_(Lzma)_V217 After your done loading this BIN to your receiver and hook it up to TV... Push 8282 on your remote to get to " CAS SYSTEM ". In there you will see " SET DEFAULT KEY"... Go to " SET DEFAULT KEY "... Push OK on remote once then EXIT out and picture should come in right away. If you don't do that then you will get " SOBC " NAG until Keys update. Do the " SET DEFAULT KEY " and picture should come in right away if the current keys don't change before you put this BIN on your receiver. Jvvh-Team-PUFF_(Lzma)_V217_(FULL JTAG)_Flash is for "JTAG ONLY". "Original 2700 BIN Modified & Compressed by fwank7" Using "Jvvh" name in BIN as a sign of respect to the 2500 to 2700 conversion creator

Note: After your done loading this BIN to your receiver and hook it up to TV... push 8282 on your remote to get to " CAS SYSTEM ". In there you will see " SET DEFAULT KEY"... Go to " SET DEFAULT KEY " and push OK on remote once then EXIT out and picture should come in right away. If you don't do that then you will get " SOBC " NAG until Keys update. Do the " SET DEFAULT KEY " and picture should come in right away if the current keys don't change before you put this BIN on your receiver.

Note: After your done loading this BIN to your receiver and hook it up to TV... push 8282 on your remote to get to " CAS SYSTEM ". In there you will see " SET DEFAULT KEY"... Go to " SET DEFAULT KEY " and push OK on remote once then EXIT out and picture should come in right away. If you don't do that then you will get " SOBC " NAG until Keys update. Do the " SET DEFAULT KEY " and picture should come in right away if the current keys don't change before you put this BIN on your receiver.

Note: Fwank7_Jvvh-Team-PUFF_(Lzma)_V209_V2 To be used with new -PUFF-Ver.1.0.3 converted boxes! c/p fwank7 Here is a V2 version of the V209_(Lzma) BIN . We added something in the BIN that will save the keys after they roll. Right now with V209 version 1, everytime you reboot receiver you have to wait for keys to update before picture comes in and with this BIN you will not have to wait. I also updated the keys in the BIN so picture should come in right away unless the keys change again, before you put this BIN on your receiver. Thanks goes to Jvvh5897 for finding this mod and all other mods as well. end c/p "Set Default Key and let it A/R". Turn A/R OFF (except Key Code) if your reciever has rebooting issues. "Original 2700 BIN Modified & Compressed by fwank7" Using "Jvvh" name in BIN as a sign of respect to the 2500 to 2700 conversion creator. Important 1- Scan the attachments before using it. 2- Report if the attachment was Corrupted/Dangerous. 3- Warning, use at your own risk

Note: dn fix

Note: D* freezing fixed. factory reset needed

Note: Homesat-11662F_20080410 Dish & BEV ecm fix.

Note: Magnum V180 DN and B*v Autoroll 04-09-08 *** New Magnum V180 DN and BEV Autoroll 04-09-08 *** 04-09-08 IMPROVEMENTS ---------------------------------- BIN Version 180 DN and BEV Autoroll MAPCALL 30 - Defeated ---------------------------------- IMPORTANT NOTES - Factory Default channel rescan NOT required! Load over V179. This file has defeats the MAPCALL 30 MECM. Please allow up to 10 minutes for AutoRoll. After Autoroll completes, place the box in standby for a moment in order to save Eeprom data to the flash . If AR does not complete in 10 minutes, place the Unit in standby for 10 seconds, turn it on, and reboot from the menu.

Note: DN up on cardless and BEV up on IKS2 (still beta but almost done!) More channels to play around with: updated list: 048,050,054,056,057,058,059,060,061,062, 063,064,065,066,067,070,071,072,073,074, 075,078,080,084,085,086,088,091,100,110, 122,130,199,200,201,202,203,204,205,209, 213,214,215

Note: Instructions for 3.35 Upgrade If you are using D1 1.0 or 1.1 fix - MUST do a factory default before uploading - Unit must be upgraded via cable If you are using the 3.35 Beta release Just upgrade via network or USB as usual

Note: Fix for current dn & BEV issue neosat available via network download pvr recording available usb memory stick

Note: Neusat/Neosat ver 3.14 Fix for current dn ecm issue (freezing) Autoroll on cardless Autoroll off IKS1 version works for all models Ipro/Pro

Note: IPro/Pro ver 2.97 Fixes dn a/r problem IKS 1 running dn & bev F3 a/r off for IKS F3 a/r on for cardless dn (must let keys roll)

Note: Really don't want to get into a big ordeal trying to explain why were not making bins for this box. Number one is mfg wants to keep 100% control of this unit. Number two is the mfg wants us to give them fixes and then use them on other units. before neusat neosat merger, neusat was giving mfg the fixes for the hd, and using them to bring up the captain first. that's about it so sence they want to do captain and not support us. and this box cannot be improved by us because of source issues, so we made this conversion BIN for those having trouble converting.. just use neusat loader or usb to load this bin then you can load captaiin bins. if by some chance captain quits support, then we will see what we can do. also will do best to make work with iks

Note: Fix for current dn ecm F3 settings - IKS BEV autoroll off F3 settings - dn cardless autoroll on is available for network download

Note: U38 Factory file (NOVA/Solaris/Phoenix) also for the Nuvenio SD This file has the weather update feature included + more Note: If you are having any problems with your receiver, it is recommended to load this file and do a factory default. This cleans out the memory and may fix many issues. This file can be loaded with the Loader with the serial cable or web Loader via the network

Note: Enjoy!!! K guys, here is an updated TP list for 129W. Total is 48 TP's. Best way to keep these settings is factory default , load this chan data, setup your sats and switches and then save your settings to USB. So if you ever have to factory default again, just load your saved DB after and scan till a new updated BIN comes out with the new defaulted TP's for 129.

Note: + Update on 1.48.1 support. I tried to auto-detect pre-1.48.1 files automatically in 1.14, but it didn't always work. So in this version I have changed it so if you want to open pre-1.48.1 files, you have to go to File -> Open... and change the box at the bottom to 1.46.1-1.48 mode. If you drag and drop a BIN , or if you have auto load on in the Web Grabber it will assume it is a 1.48.1+ file, which means your satellite settings will be all messed up if you load a pre-1.48.1 file. Also note: You can still use Web Grabber with older bins, just uncheck Auto Load and use File -> Open... to open it. + You can now drag and drop reorder the column headers in the channel list. View -> Reset Columns will reset your columns to the default order and width. + Channels in your favorites list(s) will now have a red heart beside them.

Note: Nfusion V1.48 guys and gals this BIN is final S.U.N.S.(2) with upgrades as follows below -S.U.N.S(2) final -Channel mapping upgrades -Upgrade server (both new and old reactivated) -guide bug -Sat button -fixes USALS -proxies (as before) note: you may use the upgrade function via remote as well as serial and webloader it is your choice this BIN will be placed on both upgrade servers old and new proxies are as before (you pick the proxy you want to use) please upgrade as soon as possible

Note: guys and gals Nfusion group is pleased to release 1.47t (S.U.N.S phaze 2) -S.U.N.S phaze 2 -DHCP (glich fixed) this BIN completes the equipment upgrades, and fixes DHCP issues. as of 9:30pm eastern all was completed and went live. Kinda took longer than I thought to complete Note: this is a must UPGRADE

Note: ok guys here is your BIN to control 'slingbox' use these instructions to add to your sling box if you have older 'slingbox' add in the sbav.cfg newer versions require only these steps (I tested on the slingbox pro) Here's the instructions again for using the .BIN file with the latest incarnation of SlingPlayer... 1) Make sure you're running the latest SlingPlayer 1.4.0.206 2) Copy the .BIN file into the SBAV folder in the SlingPlayer program directory 3) Fire up SlingPlayer 4) Choose from Menubar -> SlingBox -> SlingBox Directory 5) Hit -> Edit properties 6) Choose SlingBox configuration tab 7) Hot audio/Video setup to run the wizard 8) Click -> Next -until you get to Device brand 9) Choose -> Other -> Next 10) Type in the alternative code from the .BIN filename, ie, S1000 (BIN name is S1000_PL.bin) 11) Then run the power and channel tests it takes you through, hit Finish and close the menu windows

Note: X_87BL_090607_V218T.1_api_femu NAGRA 2 ONLY *******THIS IS NOT AN OFFICIAL TEAMBLACKLIST BIN******* This BIN is a re-modded version of X_87BL_090607_V218_api_femu and will save the keys from being lost when rebooting receiver. Do NOT use on a converted 2500-2700 receiver It has also been modded to display "autoroll Processing Keys" instead of "Scrambled or Bad Channel" so that you know it is rolling keys. Press 8282 then set default key and wait on a channel or manually input keys TiVo IR codes have been added to this BIN for those who own a TiVo BIG THANKS goes to mtrkc for making all the mods to the bin Do NOT use this BIN on a clone

Note: Here is a new SATOPIA file, ST111008-D1_Ver_12A-Full.

Note: ------------------------- ST301008-D1_Ver_11C-Full ------------------------- ECM Bugs Fixed

Note: This release fixes the latest issues with DN. This BIN autorolls on DN, BEV and TF. It also has picture on DN, BEV (for channels still on Nagra2), and TF. Also included is support for the currently released AKSClient, and IKS Dongle. This xbin is for the SonySat DSR 4000, 6000 and compatibles (SS and Ultrastar). This xbin can only be loaded using the SonySat Loader V2.0 or higher. Use of any other load will damage your receiver.

Note: This release fixes the latest issues with DN. This BIN autorolls on DN, BEV and TF. It also has picture on DN, BEV (for channels still on Nagra2), and TF. Also included is support for the currently released AKSClient, and IKS Dongle. This xbin is for the SonySat DSR 5000 only. This xbin can only be loaded using the SonySat Loader V3.0 or higher. Use of any other load will damage your receiver

Note: This release fixes the latest issues with TF autoroll , there is no change for DN users. . This BIN autorolls on DN, BEV and TF. It also has picture on DN, BEV (for channels still on Nagra2), and TF. . Also included is support for the currently released AKSClient, and IKS Dongle. . This xbin is for the SonySat DSR 4000, 6000 and compatibles (SS and Ultrastar). This xbin can only be loaded using the SonySat Loader V2.0 or higher. Use of any other load will damage your receiver

Note: This release fixes the latest issues with TF autoroll , there is no change for DN users. . This BIN autorolls on DN, BEV and TF. It also has picture on DN, BEV (for channels still on Nagra2), and TF. . Also included is support for the currently released AKSClient, and IKS Dongle. . This xbin is for the SonySat DSR 5000 only. This xbin can only be loaded using the SonySat Loader V3.0 or higher. Use of any other load will damage your receiver.

Note: JuggerNaut V.59L - Jan 11th This release fixes the current ecm on dn (map 3a). This BIN autorolls on DN, and TF. It also has picture on DN, and TF. Also included is support for the currently released AKSClient, and IKS Dongle. This xbin is for the SonySat DSR 5000 only. This xbin can only be loaded using the SonySat Loader V3.0 or higher. Use of any other load will damage your receiver